Knowledge of ERW line pipe

Off Line ERW pipe Inspection
Off Line ERW pipe Inspection
ERW pipe

Analysis on production process and performance of oil pipeline,which pointed out that the main reason for the lack of oil pipeline anti-rust performance and proposed oil pipeline coating process improvement, and the correct selection of a rust-proof varnish in order to achieve long-lasting anti-corrosion effect.

The basic requirements of the oil pipeline rust layer

The production process of the oil pipeline, the long-distance transport conditions and open dumps time, rust varnish should have the following properties: good construction performance, security, environmental protection, quick drying; bright, transparent film, does not cover Coding ID, do not cover up the steel pipe surface rusty state; oil pipeline to withstand wind, sun, rain and other environmental conditions, anti-rust layer should have good weather resistance; impact, bumps and impact damage during handling and transport of the oil pipeline, there factor, anti-rust layer should have good impact resistance; the operation of shipping, hot and humid zones, anti-rust layer should have good moisture resistance, salt spray resistance; in the cold region in winter and summer desert regions, the ambient temperature -30 to 60 ° C, anti-rust layer should have good temperature variability.

Coated tube is a preservative tube, spray anti-corrosion coatings prepared in the ordinary oil pipeline corrosion preventive coating are strong. Compared with the coating tubing spraying process, the coating process of the anti-rust layer of the oil pipeline is far too simple: the construction of the steel pipe surface pre-treatment; only spray an anti-rust paint, coating thickness is insufficient and uneven; coating drying insufficient coating strength is not enough, easy to destroy; the appearance of the coating thickness, leakage, adhesion did not examine the control.

It can be seen: the anti-rust layer of the oil pipeline to improve performance, optimize the production process, it is necessary to ensure that the coating quality.

Welded pipes by manufacturing process

Sunny Steel produce an extensive selection of welded steel pipe including ERW, HFI, EFW, LSAW, DSAW and UOE type carbon steel pipe along with their respective flanges and fittings.

Electric Resistance Welded Pipe
High Frequency Induction (HFI) Welded Pipe
UOE (Uing and Oing forming) Pipes

English Inglés SpanishEspañol

Contac Us

Sunny Steel Blog


Our team are highly trained and experienced in servicing and producing all types of steel supplies. Whether you've got a large construction project, or need parts for industrial machinery, our team of steel fabrication consultants will ensure that your project is provided with the parts you need, when you need them.

Link exchange

Copyright © 2011 Sunny Steel Enterprise Ltd.  All Rights Reserved ICP No.:08010763